Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== The Guide ==== Overview, specs, links to other docs Which process are you interested in? - [[process_1S-noHoles|Single sided, no holes]] - [[process_1S-holes|Single sided, with holes]] - [[process_2S-noPlate|Double sided, no plating]] - [[process_2S-plate|Double sided, with plating]] These guides is targeted towards End Users and PIs (Peer Instructors) who want to know about the standard fabrication process often employed at The Hive, either before they are certified or afterwards. It is not intended to serve as a technical manual for any of these three tools or the software that controls them; for those, see the individual tool SOPs. It is also not intended to serve as a complete list of all processes that can be achieved with this tool suite. It is simply a step-by-step guide to our two most basic and standardized processes. === Capabilities === The Hive has the-guide.txt Last modified: 2021/01/13 20:00by benh