start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
start [2021/05/30 16:11]
zolkin [The Front Desk]
start [2022/06/22 10:57] (current)
benh [PCB Manufacturing]
Line 26: Line 26:
     * These printers allow unique geometries to be printed by using dissoluble support material     * These printers allow unique geometries to be printed by using dissoluble support material
   * j55 stratasys?   * j55 stratasys?
-  * [[https://​docs.google.com/​document/​d/​1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/​|Ender 5 Pro]] +  * [[https://​docs.google.com/​document/​d/​1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/​|Ender 5 Pro]] 
     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done
   * 2 [[https://​docs.google.com/​document/​d/​1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/​edit?​usp=sharing| Ultimaker 3s Printers]]   * 2 [[https://​docs.google.com/​document/​d/​1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/​edit?​usp=sharing| Ultimaker 3s Printers]]
Line 32: Line 32:
   * 1 [[https://​docs.google.com/​document/​d/​1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/​|Markforged MarkTwo]]   * 1 [[https://​docs.google.com/​document/​d/​1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/​|Markforged MarkTwo]]
     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.
 +  * 2 [[ld-002r|Creality LD-002R SLA Resin Printer]]
 +    * These SLA printers specialize in high detail and surface finish using SLA Technology
  
 ==== Laser Cutting ===== ==== Laser Cutting =====
Line 72: Line 74:
  
 In addition we also have Youtube Demo's listed for all of these different pieces of equipment found here:​[[https://​www.youtube.com/​playlist?​list=PLaHV-4SxpcHx4nsOkHsaOwHsnmBU3wZ4W|link]] ​ In addition we also have Youtube Demo's listed for all of these different pieces of equipment found here:​[[https://​www.youtube.com/​playlist?​list=PLaHV-4SxpcHx4nsOkHsaOwHsnmBU3wZ4W|link]] ​
 +
 +[[benchtop:​equipList|A full list of equipment is available here.]]
 ==== PCB Manufacturing ==== ==== PCB Manufacturing ====
  
Line 79: Line 83:
   * [[pcb-help_pm|The LPKF ProtoMat S103]] - a 2.5-dimensional plotter that drills and mills (cuts) PCB substrates, plastics, and soft metals   * [[pcb-help_pm|The LPKF ProtoMat S103]] - a 2.5-dimensional plotter that drills and mills (cuts) PCB substrates, plastics, and soft metals
   * [[pcb-help_pl|The LPKF ProtoLaser U4]] - a 20um-diameter laser to etch (selectively remove) a wide variety of film/​substrate pairings   * [[pcb-help_pl|The LPKF ProtoLaser U4]] - a 20um-diameter laser to etch (selectively remove) a wide variety of film/​substrate pairings
-  * [[pcb-help_ep|The LPKF Contac S4]] - a semi-automatic electroplater for via formation and other copper/tin plating needs+  * [[pcb-help_ep|The LPKF Contac S4]] - a semi-automatic ​galvanic ​electroplater for via formation and other copper/tin plating needs 
 + 
 +We also can [[process_stencils|cut stencils]], and assemble boards with a [[process_reflowoven|reflow oven]]. We also have a few unsupported capabilities,​ including applying [[https://​www.lpkfusa.com/​datasheets/​prototyping/​promask.pdf|soldermask]] and [[https://​www.lpkfusa.com/​datasheets/​prototyping/​prolegend.pdf|silkscreen]],​ as well as a [[https://​www.lpkfusa.com/​datasheets/​prototyping/​ProConduct_Specs.pdf|chemical-free electroplating]] process, but again, your mileage may vary with these. Head to our [[pcb-fab|PCB fabrication]] page for more details.
  
 The Hive provides double-sided copper on FR4 in 0.5 oz/ft^2 (18 um) and 1 oz/ft^2 (35 um) weights to our users at no cost, though many other substrates can be used.  The Hive provides double-sided copper on FR4 in 0.5 oz/ft^2 (18 um) and 1 oz/ft^2 (35 um) weights to our users at no cost, though many other substrates can be used. 
Line 85: Line 91:
 Our DRC file: [[https://​drive.google.com/​open?​id=1YITdTXkcW3ROWZprw-xxPsB8okc73yqF|DRC]]\\ Our DRC file: [[https://​drive.google.com/​open?​id=1YITdTXkcW3ROWZprw-xxPsB8okc73yqF|DRC]]\\
 Out CAM file: [[https://​drive.google.com/​open?​id=1WzzpPwXMDUg5DD4iUzenZINrzRG0kSn4|CAM]]\\ Out CAM file: [[https://​drive.google.com/​open?​id=1WzzpPwXMDUg5DD4iUzenZINrzRG0kSn4|CAM]]\\
- 
-=== Useful Links === 
  
   * No idea what a trace is? --> [[pcb-basics|What is a PCB?]]   * No idea what a trace is? --> [[pcb-basics|What is a PCB?]]
   * Designing your own PCB? --> [[pcb-design|PCB Design]]   * Designing your own PCB? --> [[pcb-design|PCB Design]]
-  * How does one get trained? --> [[pcb-training|PCB Training]] +  * Want to use the machines? --> [[pcb-training|PCB Training]] 
-  * All things fabrication --> [[pcb-fab|PCB Fabrication]] +  * Looking to schedule tool time? --> [[http://​www.sums.gatech.edu|Head to SUMS!]] ([[https://​gtvault.sharepoint.com/:​w:/​s/​HiveMakerspace/​ETGfA3m7Q3tCmtG0XVgAHG0Bz3-84vabxqlTRuF5spUmQw?​e=q999Yt|What is SUMS?]]) 
-  * Looking to schedule tool time? --> [[http://​www.sums.gatech.edu|Head to SUMS!]]+  * What can we do, and how to do it --> [[pcb-fab|PCB Fabrication]]
   * Help! And Other Questions --> [[pcb-help|Knowledge Base and FAQ]]   * Help! And Other Questions --> [[pcb-help|Knowledge Base and FAQ]]
-  * Take you fabrication to the next level! --> [[pcb-tips|PCB Fab Tips and Tricks]] 
-  * Official Standard Operating Procedures --> [[pcb-sops|SOPs]] 
  
 Questions? You can reach the PCB MPIs at [[hive-pcb@ece.gatech.edu]]. Questions? You can reach the PCB MPIs at [[hive-pcb@ece.gatech.edu]].
Line 121: Line 123:
   * [[https://​docs.google.com/​document/​d/​1SUMQI8_UgVF7M0ihd8Glz9Z2m9h9XdPRv93W0NECXdY/​edit?​usp=sharing| Hand Tools]]   * [[https://​docs.google.com/​document/​d/​1SUMQI8_UgVF7M0ihd8Glz9Z2m9h9XdPRv93W0NECXdY/​edit?​usp=sharing| Hand Tools]]
   * [[https://​docs.google.com/​document/​d/​1yMeGPBlozGpkKePS0IW1K93vtVHZE9u5IyeeFU0W898/​edit?​usp=sharing| Quick Starts and Safety for other tools]]   * [[https://​docs.google.com/​document/​d/​1yMeGPBlozGpkKePS0IW1K93vtVHZE9u5IyeeFU0W898/​edit?​usp=sharing| Quick Starts and Safety for other tools]]
 +  * [[shopinventory|Shop Inventory - WIP]]
 In addition to the SOP's, the Hive has also created a video series on the Machine shop that you can watch to familiarize yourselves with the tools. Here's the [[https://​www.youtube.com/​playlist?​list=PLaHV-4SxpcHxXAjU6JqBEzSRYNgT7Uvle|playlist]]. Below you can sample one of these videos. In addition to the SOP's, the Hive has also created a video series on the Machine shop that you can watch to familiarize yourselves with the tools. Here's the [[https://​www.youtube.com/​playlist?​list=PLaHV-4SxpcHxXAjU6JqBEzSRYNgT7Uvle|playlist]]. Below you can sample one of these videos.
  
Line 136: Line 139:
   * Beaglebone   * Beaglebone
   * TI launchpads   * TI launchpads
 +
 +
 +----
 +There'​s no such thing as a '​best'​ microcontroller. It all depends on what you want to do. Therefore, depending on your needs, one microcontroller might be more appropriate. For example, the fastest chips tend to use more power than the slowest ones. The boards with the most I/O pins are bigger (and usually cost more) than ones with fewer features. Below is a list of aspects to consider when choosing a microcontroller. For more information,​ click [[selection-guide|Here]]
 +
 +
 Items are available for checkout at the front desk. We do //not// sell electronics parts. If you need to purchase a part, please visit an online vendor. For more information on borrowing components, see [[front-desk|the front desk]]. Items are available for checkout at the front desk. We do //not// sell electronics parts. If you need to purchase a part, please visit an online vendor. For more information on borrowing components, see [[front-desk|the front desk]].
   * Add more resources and pages on getting started with embedded systems! Logistics do not go here.   * Add more resources and pages on getting started with embedded systems! Logistics do not go here.
  • start.1622405500.txt.gz
  • Last modified: 2021/05/30 16:11
  • by zolkin