start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
start [2021/03/04 11:10] – [Resources at the IDC] stevs_77start [2022/06/22 10:50] – [PCB Manufacturing] benh
Line 17: Line 17:
 You can also check out equipment (for free!) at the front desk, including Raspberry Pis, motors, Beaglebones, solder practice kits, USB cables, and several types of Arduinos. The loan period is two weeks, and can be renewed at the end of the time period. Other supplies, including circuit components, electrical wire, and solder, can be found near the workstations. You can also check out equipment (for free!) at the front desk, including Raspberry Pis, motors, Beaglebones, solder practice kits, USB cables, and several types of Arduinos. The loan period is two weeks, and can be renewed at the end of the time period. Other supplies, including circuit components, electrical wire, and solder, can be found near the workstations.
  
 +There are also lockers available for checkout at the front desk. If you have a big project, or don't want to carry a project back home each day then you may want to consider getting a locker. A PI at the front desk can get you a locker and a combination lock for it. If you forget your combination, we can look it up for you at the front desk too.
 ==== 3D Printing ==== ==== 3D Printing ====
  
Line 25: Line 26:
     * These printers allow unique geometries to be printed by using dissoluble support material     * These printers allow unique geometries to be printed by using dissoluble support material
   * j55 stratasys?   * j55 stratasys?
-  * [[https://docs.google.com/document/d/1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/|Ender 5 Pro]] +  * [[https://docs.google.com/document/d/1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/|Ender 5 Pro]] 
     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done
   * 2 [[https://docs.google.com/document/d/1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/edit?usp=sharing| Ultimaker 3s Printers]]   * 2 [[https://docs.google.com/document/d/1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/edit?usp=sharing| Ultimaker 3s Printers]]
Line 31: Line 32:
   * 1 [[https://docs.google.com/document/d/1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/|Markforged MarkTwo]]   * 1 [[https://docs.google.com/document/d/1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/|Markforged MarkTwo]]
     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.
 +  * 2 [[ld-002r|Creality LD-002R SLA Resin Printer]]
 +    * These SLA printers specialize in high detail and surface finish using SLA Technology
  
 ==== Laser Cutting ===== ==== Laser Cutting =====
Line 71: Line 74:
  
 In addition we also have Youtube Demo's listed for all of these different pieces of equipment found here:[[https://www.youtube.com/playlist?list=PLaHV-4SxpcHx4nsOkHsaOwHsnmBU3wZ4W|link]]  In addition we also have Youtube Demo's listed for all of these different pieces of equipment found here:[[https://www.youtube.com/playlist?list=PLaHV-4SxpcHx4nsOkHsaOwHsnmBU3wZ4W|link]] 
 +
 +[[benchtop:equipList|A full list of equipment is available here.]]
 ==== PCB Manufacturing ==== ==== PCB Manufacturing ====
  
Line 78: Line 83:
   * [[pcb-help_pm|The LPKF ProtoMat S103]] - a 2.5-dimensional plotter that drills and mills (cuts) PCB substrates, plastics, and soft metals   * [[pcb-help_pm|The LPKF ProtoMat S103]] - a 2.5-dimensional plotter that drills and mills (cuts) PCB substrates, plastics, and soft metals
   * [[pcb-help_pl|The LPKF ProtoLaser U4]] - a 20um-diameter laser to etch (selectively remove) a wide variety of film/substrate pairings   * [[pcb-help_pl|The LPKF ProtoLaser U4]] - a 20um-diameter laser to etch (selectively remove) a wide variety of film/substrate pairings
-  * [[pcb-help_ep|The LPKF Contac S4]] - a semi-automatic electroplater for via formation and other copper/tin plating needs+  * [[pcb-help_ep|The LPKF Contac S4]] - a semi-automatic galvanic electroplater for via formation and other copper/tin plating needs 
 + 
 +We also can [[process_stencils|cut stencils]], and assemble boards with a [[process_reflowoven|reflow oven]]. We also have a few unsupported capabilities, including applying [[https://www.lpkfusa.com/datasheets/prototyping/promask.pdf|soldermask]] and [[https://www.lpkfusa.com/datasheets/prototyping/prolegend.pdf|silkscreen]], as well as a [[https://www.lpkfusa.com/datasheets/prototyping/ProConduct_Specs.pdf|chemical-free electroplating]] process, but again, your mileage may vary with these. Head to our [[pcb-fab|PCB fabrication]] page for more details.
  
 The Hive provides double-sided copper on FR4 in 0.5 oz/ft^2 (18 um) and 1 oz/ft^2 (35 um) weights to our users at no cost, though many other substrates can be used.  The Hive provides double-sided copper on FR4 in 0.5 oz/ft^2 (18 um) and 1 oz/ft^2 (35 um) weights to our users at no cost, though many other substrates can be used. 
Line 89: Line 96:
   * No idea what a trace is? --> [[pcb-basics|What is a PCB?]]   * No idea what a trace is? --> [[pcb-basics|What is a PCB?]]
   * Designing your own PCB? --> [[pcb-design|PCB Design]]   * Designing your own PCB? --> [[pcb-design|PCB Design]]
-  * How does one get trained? --> [[pcb-training|PCB Training]] +  * Want to use the machines? --> [[pcb-training|PCB Training]] 
-  * All things fabrication --> [[pcb-fab|PCB Fabrication]] +  * Looking to schedule tool time? --> [[http://www.sums.gatech.edu|Head to SUMS!]] ([[[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/ETGfA3m7Q3tCmtG0XVgAHG0Bz3-84vabxqlTRuF5spUmQw?e=q999Yt|What is SUMS?]]) 
-  * Looking to schedule tool time? --> [[http://www.sums.gatech.edu|Head to SUMS!]]+  * What can we do, and how to do it --> [[pcb-fab|PCB Fabrication]]
   * Help! And Other Questions --> [[pcb-help|Knowledge Base and FAQ]]   * Help! And Other Questions --> [[pcb-help|Knowledge Base and FAQ]]
-  * Take you fabrication to the next level! --> [[pcb-tips|PCB Fab Tips and Tricks]] 
-  * Official Standard Operating Procedures --> [[pcb-sops|SOPs]] 
  
 Questions? You can reach the PCB MPIs at [[hive-pcb@ece.gatech.edu]]. Questions? You can reach the PCB MPIs at [[hive-pcb@ece.gatech.edu]].
Line 120: Line 125:
   * [[https://docs.google.com/document/d/1SUMQI8_UgVF7M0ihd8Glz9Z2m9h9XdPRv93W0NECXdY/edit?usp=sharing| Hand Tools]]   * [[https://docs.google.com/document/d/1SUMQI8_UgVF7M0ihd8Glz9Z2m9h9XdPRv93W0NECXdY/edit?usp=sharing| Hand Tools]]
   * [[https://docs.google.com/document/d/1yMeGPBlozGpkKePS0IW1K93vtVHZE9u5IyeeFU0W898/edit?usp=sharing| Quick Starts and Safety for other tools]]   * [[https://docs.google.com/document/d/1yMeGPBlozGpkKePS0IW1K93vtVHZE9u5IyeeFU0W898/edit?usp=sharing| Quick Starts and Safety for other tools]]
 +  * [[shopinventory|Shop Inventory - WIP]]
 In addition to the SOP's, the Hive has also created a video series on the Machine shop that you can watch to familiarize yourselves with the tools. Here's the [[https://www.youtube.com/playlist?list=PLaHV-4SxpcHxXAjU6JqBEzSRYNgT7Uvle|playlist]]. Below you can sample one of these videos. In addition to the SOP's, the Hive has also created a video series on the Machine shop that you can watch to familiarize yourselves with the tools. Here's the [[https://www.youtube.com/playlist?list=PLaHV-4SxpcHxXAjU6JqBEzSRYNgT7Uvle|playlist]]. Below you can sample one of these videos.
  
Line 135: Line 141:
   * Beaglebone   * Beaglebone
   * TI launchpads   * TI launchpads
 +
 +
 +----
 +There's no such thing as a 'best' microcontroller. It all depends on what you want to do. Therefore, depending on your needs, one microcontroller might be more appropriate. For example, the fastest chips tend to use more power than the slowest ones. The boards with the most I/O pins are bigger (and usually cost more) than ones with fewer features. Below is a list of aspects to consider when choosing a microcontroller. For more information, click [[selection-guide|Here]]
 +
 +
 Items are available for checkout at the front desk. We do //not// sell electronics parts. If you need to purchase a part, please visit an online vendor. For more information on borrowing components, see [[front-desk|the front desk]]. Items are available for checkout at the front desk. We do //not// sell electronics parts. If you need to purchase a part, please visit an online vendor. For more information on borrowing components, see [[front-desk|the front desk]].
   * Add more resources and pages on getting started with embedded systems! Logistics do not go here.   * Add more resources and pages on getting started with embedded systems! Logistics do not go here.
Line 182: Line 194:
 ===== Editing this Wiki ===== ===== Editing this Wiki =====
  
-Currently, anyone can edit this wiki, but that will probably be changed soon. +Currently, only approved authors may edit the HIVE wiki.
- +
-In order to edit, you have to create an account and log in first! Please use your real name for your account.+
  
 Note that we have the [[https://www.dokuwiki.org/plugin:vshare|Video Share plugin]] Note that we have the [[https://www.dokuwiki.org/plugin:vshare|Video Share plugin]]
  • start.txt
  • Last modified: 2024/03/03 12:49
  • by benh