start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
start [2021/03/04 11:09] – [Resources at the IDC] stevs_77start [2021/08/05 09:27] – ttoma3
Line 6: Line 6:
  
 ===== Resources at the IDC ===== ===== Resources at the IDC =====
-At the IDC, you can find a plethora of equipment to assist you with your projects. Along with spare wood to help you downstairs, and a seemingly endless supply of 3D print materials, our electrical equipment lying behind the front desk can be found here at this [[https://docs.google.com/spreadsheets/d/15Sbaoj5zxmmhSIjC-CDVb_Hj0lP9KYyac2ZUaWkbhMU/edit?usp=sharing|link]]. . This equipment list is a work in progress, so it may not be 100 percent up to date, but it should have just about everything we have. You're always free to ask if we have something if you don't see it on the equipment list. Additionally, small scale components like IC's, resistors, and LED's are very plentiful and are not on the component list, but we have them (1-1Mohm)!+At the IDC, you can find a plethora of equipment to assist you with your projects. Along with spare wood to help you downstairs, and a seemingly endless supply of 3D print materials, our electrical equipment lying behind the front desk can be found here at this [[https://docs.google.com/spreadsheets/d/15Sbaoj5zxmmhSIjC-CDVb_Hj0lP9KYyac2ZUaWkbhMU/edit?usp=sharing|link]].  
 + 
 +This equipment list is a work in progress, so it may not be 100 percent up to date, but it should have just about everything we have. You're always free to ask if we have something if you don't see it on the equipment list. Additionally, small scale components like IC's, resistors, and LED's are very plentiful and are not on the component list, but we have them (1-1Mohm)!
  
  
Line 15: Line 17:
 You can also check out equipment (for free!) at the front desk, including Raspberry Pis, motors, Beaglebones, solder practice kits, USB cables, and several types of Arduinos. The loan period is two weeks, and can be renewed at the end of the time period. Other supplies, including circuit components, electrical wire, and solder, can be found near the workstations. You can also check out equipment (for free!) at the front desk, including Raspberry Pis, motors, Beaglebones, solder practice kits, USB cables, and several types of Arduinos. The loan period is two weeks, and can be renewed at the end of the time period. Other supplies, including circuit components, electrical wire, and solder, can be found near the workstations.
  
 +There are also lockers available for checkout at the front desk. If you have a big project, or don't want to carry a project back home each day then you may want to consider getting a locker. A PI at the front desk can get you a locker and a combination lock for it. If you forget your combination, we can look it up for you at the front desk too.
 ==== 3D Printing ==== ==== 3D Printing ====
  
Line 23: Line 26:
     * These printers allow unique geometries to be printed by using dissoluble support material     * These printers allow unique geometries to be printed by using dissoluble support material
   * j55 stratasys?   * j55 stratasys?
-  * 3 [[https://docs.google.com/document/d/1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/|Ender 5 Pro]] +  * 2 [[https://docs.google.com/document/d/1-XuSSHcQfh2pjb3Wgrt2g4Xu4taNBODylgcgxYdu9t8/|Ender 5 Pro]] 
     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done     * The Ender 5 Printers are our low cost printers that allow for casual, low time-consuming prints to be done
   * 2 [[https://docs.google.com/document/d/1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/edit?usp=sharing| Ultimaker 3s Printers]]   * 2 [[https://docs.google.com/document/d/1wo_SjmYISe5MhxdF3xqbR_0CxDL-sdmEaeo0QKCEbWg/edit?usp=sharing| Ultimaker 3s Printers]]
Line 29: Line 32:
   * 1 [[https://docs.google.com/document/d/1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/|Markforged MarkTwo]]   * 1 [[https://docs.google.com/document/d/1F1NWrtbFoLqjVfmC54-qojDLVxIF7CTrYLy3X1Ag-lU/|Markforged MarkTwo]]
     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.     * The MarkTwo is a specialty 3D printer that prints high strength parts using nylon-based material with fiber reinforcements such as carbon fiber.
 +  * 2 Creality LD-002R SLA Resin Printer
 +    * These SLA printers specialize in high detail and surface finish
  
 ==== Laser Cutting ===== ==== Laser Cutting =====
Line 180: Line 185:
 ===== Editing this Wiki ===== ===== Editing this Wiki =====
  
-Currently, anyone can edit this wiki, but that will probably be changed soon. +Currently, only approved authors may edit the HIVE wiki.
- +
-In order to edit, you have to create an account and log in first! Please use your real name for your account.+
  
 Note that we have the [[https://www.dokuwiki.org/plugin:vshare|Video Share plugin]] Note that we have the [[https://www.dokuwiki.org/plugin:vshare|Video Share plugin]]
  • start.txt
  • Last modified: 2024/04/29 14:48
  • by benh