process_2s-plate

This is an old revision of the document!


Before starting, make sure:

Step 1: Process setup and first drilling on the ProtoMat

  • The ProtoMat will pause at a step called “Dismount Material”. Continue with Step 2.

Step 2: Electroplating with the Contac S4

Step 3: Etching with the ProtoLaser

Step 4: Routing with the ProtoMat


Common Issues

  • Some issue
  • process_2s-plate.1610413581.txt.gz
  • Last modified: 2021/01/11 20:06
  • by benh