process_2s-noplate

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
process_2s-noplate [2021/01/15 10:58]
benh
process_2s-noplate [2022/07/15 16:20]
benh
Line 3: Line 3:
 //(Some common errors and solutions are listed after the process steps.)//\\ //(Some common errors and solutions are listed after the process steps.)//\\
 \\ \\
-Before starting, make sure: +**Before starting, make sure:** 
-  * [[https://docs.google.com/document/d/1y6qYp7Tv8lrvHjeBfjXF7t3Xf4442x8UzIu57bmN_Nc/edit?usp=sharing|you'​re logged into SUMS]]; +  * [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EVBq41QPV51FvAhi3I_zkAUBqOHfQh_ylA_ddHQ4ZyzPGA?e=cO0su7|you'​re logged into SUMS]]; 
-  * [[https://docs.google.com/document/d/1tKj2HkHCQ8RM09Q0a0PphZlWCgmuA4eVphwEWvrsnhc/edit?usp=sharing|the ProtoMat and software are running]]; and +  * [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EY2LyqOt_o9Pr8JPhp6u26cBxRIilQx5lEn7qFY9cZ2SoA?e=nH5y1X|the ProtoMat and software are running]]; and 
-  * [[https://docs.google.com/document/d/1ni6ZMIp7A1YNk7fruk6TA6x-7CXlVUl-xI4Tt_hdHEo/​edit?usp=sharing|the ProtoLaser ​are software are on and warming up]].+  * [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/​EbBDlXvWlSVItrI0YtYitGoBxD4IAhapi2-ZIFklbZFu_w?e=rjlMci|the ProtoLaser ​and software are on and warming up]].
  
-Step 1: [[https://docs.google.com/document/d/1z67U7quFQ2fclWWpJhwjuKuP1tThYhn1iTQfWKsAJ7Q/edit?usp=sharing|Process setup and first drilling on the ProtoMat]]+**Step 1:** [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EVU4FeAXtdBLmLRg28Gp1XkBkJj_OcnjsgNE_SWZ_LaIYg?e=0bBHpq|Process setup and first drilling on the ProtoMat]]
  
   * After completion of Step 1, the ProtoMat will pause at a step called "Flip Material"​.   * After completion of Step 1, the ProtoMat will pause at a step called "Flip Material"​.
Line 15: Line 15:
   * Move to the ProtoLaser, and continue with Step 2.   * Move to the ProtoLaser, and continue with Step 2.
  
-Step 2: [[https://docs.google.com/document/d/12wh_QeFDMwJ3yHM_1vKg2GOl59GsFNlvb-bEEM9CVig/edit?usp=sharing|Etching with the ProtoLaser]]+**Step 2:** [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/ERfKdS6GbVpJo6k_gJ1MgLgB3VVaU7ckSrJCkb4FGMK1IA?e=1rAYmW|Etching with the ProtoLaser]]
  
-Step 3: [[https://docs.google.com/document/d/1uAXuYXLWbGZ9QXFLtfK_cNIoK9yKyPrC-1UqUaSmDzk/edit?usp=sharing|Routing with the ProtoMat]]+**Step 3:**[[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/Edjj8jMNM41GlLnyGoimobUBNnqyUsva7KgEmdtWk4Ceow?e=brYMfK|Routing with the ProtoMat]]
  
 ---- ----
Line 60: Line 60:
     * //Potential issue:// The vacuum hose(s) may be clogged.     * //Potential issue:// The vacuum hose(s) may be clogged.
       * There are two vacuum hoses. One runs from the extraction hood (the round plastic bit inside the main bay) to the rear interior wall of the tool, and the second runs from the outside backside of the tool to the vacuum system (the tall white box to the tool’s right). You should be able to remove both of these and check for clogs.       * There are two vacuum hoses. One runs from the extraction hood (the round plastic bit inside the main bay) to the rear interior wall of the tool, and the second runs from the outside backside of the tool to the vacuum system (the tall white box to the tool’s right). You should be able to remove both of these and check for clogs.
 +
 +  * **I'm having other issues.**
 +Please check out our [[pcb-help|Knowledge Base]] for additional Q&As, tips, tricks, and solutions to common processing errors. ​
  
  • process_2s-noplate.txt
  • Last modified: 2022/07/15 16:37
  • by benh