pcb-tips

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pcb-tips [2022/07/15 16:02] benhpcb-tips [2023/09/05 13:37] (current) benh
Line 24: Line 24:
   * Laser cannot do two-sided jobs with plating by itself; the plotter is required for fiducials. No idea why.   * Laser cannot do two-sided jobs with plating by itself; the plotter is required for fiducials. No idea why.
   * You can actually make boards with more required bits than the tool magazine has slots. It will yell at you about it, but just walk through the process as normal and it will ask you to put the bits into the magazine when it needs them.   * You can actually make boards with more required bits than the tool magazine has slots. It will yell at you about it, but just walk through the process as normal and it will ask you to put the bits into the magazine when it needs them.
 +  * The LPKF sofware handles drill hits down to 0.2mm (7.5 mil) without any adjustments, but we have the capability to make 0.15mm (5.6 mil) drill hits as well with slightly more effort. See our [[pcb-help_pm_0.15mm-drills|0.15mm Drill Hits]] page for details on that.
  
 [[pcb-book-of-kane|The Book of Kane]] [[pcb-book-of-kane|The Book of Kane]]
  • pcb-tips.txt
  • Last modified: 2023/09/05 13:37
  • by benh