Differences

This shows you the differences between two versions of the page.

--- pcb-help_pl [2021/10/08 12:43] – Added solution for cutting/drilling toolpaths madeline
+++ pcb-help_pl [2022/06/25 14:43] – benh
@@ Line 4: / Line 4: @@
   - Overview
   - Q & A
+    - What materials have been successfully etched?
     - Using a "new" material
     - Optimization
@@ Line 49: / Line 50: @@
 ----
 ===Q & A===
+** What materials have been used successfully? ** \\
+This is a running list of materials that we, or someone we know of, have successfully etched and/or cut. //(Last updated: 2022-06-22)//
+  * 0.5oz (18um)/1oz (35um) copper on FR4 (standard Hive material)
+  * 5mil/0.125mm polyamide (stencils)
+  * Polyester (PET) (1mil and 2mil) [Stephan Strassle]
+  * Rogers TMM 10i [Madeline Holda]
 ** Using a "new" material ** \\
-So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this.
+So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this. You can also see below for optimizing this process.
 ** Optimization **\\