pcb-help_pl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
pcb-help_pl [2021/10/08 12:43] – Added solution for cutting/drilling toolpaths madelinepcb-help_pl [2022/06/22 11:12] – benh
Line 49: Line 49:
 ---- ----
 ===Q & A=== ===Q & A===
 +** What materials have been used successfully? ** \\
 +This is a running list of materials that we, or someone we know of, have successfully etched and/or cut. //(Last updated: 2022-06-22)//
 +  * 0.5oz (18um)/1oz (35um) copper on FR4 (standard Hive material)
 +  * Polyester (PET) [Stephan Strassle]
 +
 ** Using a "new" material ** \\ ** Using a "new" material ** \\
-So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this.+So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this. You can also see below for optimizing this process.
  
 ** Optimization **\\ ** Optimization **\\
  • pcb-help_pl.txt
  • Last modified: 2022/07/18 18:06
  • by benh