pcb-help_pl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
pcb-help_pl [2021/10/08 12:43] – Added solution for cutting/drilling toolpaths madelinepcb-help_pl [2022/06/22 11:10] benh
Line 49: Line 49:
 ---- ----
 ===Q & A=== ===Q & A===
 +** What materials have been used successfully? ** \\
 +This is a running list of materials that we, or someone we know of, have successfully etched and/or cut. //(Last updated: 2022-06-22)//
 +  * 0.5oz (18um)/1oz (35um) copper on FR4 (standard Hive material)
 +  *  
 +
 ** Using a "new" material ** \\ ** Using a "new" material ** \\
-So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this.+So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://gtvault.sharepoint.com/:w:/s/HiveMakerspace/EShrwNPAMH1Cj3cE3pg5h8QB6r3JP-XtLghmQcU96-fNfA?e=Ska4Ud|ProtoLaser: New Material]] document for how to do this. You can also see below for optimizing this process.
  
 ** Optimization **\\ ** Optimization **\\
  • pcb-help_pl.txt
  • Last modified: 2022/07/18 18:06
  • by benh