pcb-help_pl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
pcb-help_pl [2021/01/17 16:22] – benhpcb-help_pl [2021/01/17 16:50] – benh
Line 5: Line 5:
   - Q & A   - Q & A
     - Using a "new" material     - Using a "new" material
 +    - Optimization
   - Common processing errors   - Common processing errors
     - The pre-toolpath file did not import correctly.     - The pre-toolpath file did not import correctly.
Line 50: Line 51:
 ** Using a "new" material ** \\ ** Using a "new" material ** \\
 So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://docs.google.com/document/d/1cSzj7JneW4bxKN7n9ntSDFMEgimxm6dbDMw8x6RknpE/edit?usp=sharing|ProtoLaser: New Material]] document for how to do this. So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://docs.google.com/document/d/1cSzj7JneW4bxKN7n9ntSDFMEgimxm6dbDMw8x6RknpE/edit?usp=sharing|ProtoLaser: New Material]] document for how to do this.
 +
 +** Optimization **\\
 +The ProtoLaser can be a very powerful tool. If you're working carefully with it, and you want to know more details about how the tool works, and how to better optimize your process, please see LPKF's [[https://drive.google.com/file/d/1rF-XXszzSLil9l0rhl82kTUsCyUagpYU/view?usp=sharing|Protolaser - Optimization.pdf]] document. This has proven to be useful for some users in the past. You can also contact LPKF directly at [[support@lpkfusa.com]].
 ---- ----
 === Common processing errors === === Common processing errors ===
  • pcb-help_pl.txt
  • Last modified: 2022/07/18 18:06
  • by benh