Differences

This shows you the differences between two versions of the page.

--- pcb-help_pl [2021/01/17 14:36] – benh
+++ pcb-help_pl [2021/01/17 16:22] – benh
@@ Line 4: / Line 4: @@
   - Overview
   - Q & A
+    - Using a "new" material
   - Common processing errors
     - The pre-toolpath file did not import correctly.
@@ Line 43: / Line 44: @@
 LPKF's "How-To" guides: [[https://drive.google.com/file/d/1_Micu9tWmRdbYdbN3eI2AKbIfn4hzWNI/view?usp=sharing|ProtoLaser U4 How To Guides.pdf]]\\
 Software guide: [[https://drive.google.com/file/d/1jqR5wxnQLJAZjezrfv-xtRAbVk5Unb49/view?usp=sharing|CircuitPro 3.0 PL - Software Guide.pdf]]\\
-Vacuum system manual: [[https://drive.google.com/file/d/1hqnQRs0nk9Gr2x3jGlLfUgmQC5OFKuzb/view?usp=sharing|Dust Extraction Manual CSA 600 iSeries-e-1-0.pdf]]
+Vacuum system manual: [[https://drive.google.com/file/d/1hqnQRs0nk9Gr2x3jGlLfUgmQC5OFKuzb/view?usp=sharing|Dust Extraction Manual CSA 600 iSeries-e-1-0.pdf]]\\
+Optimizing your process: [[https://drive.google.com/file/d/1rF-XXszzSLil9l0rhl82kTUsCyUagpYU/view?usp=sharing|Protolaser - Optimization.pdf]]
 ----
 ===Q & A===
+** Using a "new" material ** \\
+So you have a material that either isn't in the laser's material list, or maybe you just want to play around with the settings. Exciting! Head over to our [[https://docs.google.com/document/d/1cSzj7JneW4bxKN7n9ntSDFMEgimxm6dbDMw8x6RknpE/edit?usp=sharing|ProtoLaser: New Material]] document for how to do this.
 ----
 === Common processing errors ===