Differences

This shows you the differences between two versions of the page.

--- stratasys_f170 [2021/01/24 17:08] – ttoma3
+++ stratasys_f170 [2021/02/04 12:38] (current) – ttoma3
@@ Line 15: / Line 15: @@
 GrabCAD print is a slicing software for generating files that the Stratasys F170 printer can process.
+===Creating a Project File===
+  - Go to File > New Project
 ===Making your tray & placing models===
-  * On the computer, open GrabCAD Print.
+  - On the computer, open GrabCAD Print.
-  * Create a new tray. Trays can hold multiple files and models.
+  - Create a new tray. Trays can hold multiple files and models.
-  * Upload file(s) by clicking on to the area which says “Add models”.
+  - Upload file(s) by clicking on to the area which says “Add models”.
 The software supports Inventor’s IAM, IPT, Solidwork’s SLDASM, SLDPRT, IGES 5.1-5.3, and STP/STEP(AP 203 E1/E2, AP 214, AP 242) files. More file types are listed here: https://help.grabcad.com/article/214-list-of-supported-file-formats?locale=en
-The project contains a list of models, including both parts and assemblies. The left checkbox shows if the part will exist on the tray. The right check box is if you would like to print a job already assembled.
+===Settings for the tray===
+There are tools available to manipulate models and printing parameters.
+  * Units
+  * Tray Settings
+  * Model Settings
+  * Infill Settings
+  * Arrange
+  * Orient
+  * Scale
 =====Printing from Queue=====