Differences

This shows you the differences between two versions of the page.

--- stratasys_f170 [2020/03/22 18:00] – created ttoma3
+++ stratasys_f170 [2021/02/04 12:38] (current) – ttoma3
@@ Line 1: / Line 1: @@
-Stratasys F170
+======Stratasys F170======
+The Stratasys F170 is the most used printer at the IDC, located in the [[Semi-Clean Room|Semi-Clean Room]].
+It is part of the F123 series printers created by Stratasys for rapid prototyping.
+=====Safety=====
+No PPE (Personal Protective Equipment) is required to handling the F170 in normal operation. Gloves are recommended during maintenance since the apparatus of the printer may be 70°C or hotter during non-PLA modes.
+=====Preparing Print Files=====
+In order to print on the F170, tray files must be generated using GrabCAD Print.
+====Using GrabCAD Print====
+GrabCAD print is a slicing software for generating files that the Stratasys F170 printer can process.
+===Creating a Project File===
+  - Go to File > New Project
+===Making your tray & placing models===
+  - On the computer, open GrabCAD Print.
+  - Create a new tray. Trays can hold multiple files and models.
+  - Upload file(s) by clicking on to the area which says “Add models”.
+The software supports Inventor’s IAM, IPT, Solidwork’s SLDASM, SLDPRT, IGES 5.1-5.3, and STP/STEP(AP 203 E1/E2, AP 214, AP 242) files. More file types are listed here: https://help.grabcad.com/article/214-list-of-supported-file-formats?locale=en
+===Settings for the tray===
+There are tools available to manipulate models and printing parameters.
+  * Units
+  * Tray Settings
+  * Model Settings
+  * Infill Settings
+  * Arrange
+  * Orient
+  * Scale
+=====Printing from Queue=====