pcb-help_ep

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pcb-help_ep [2022/10/03 18:41] benhpcb-help_ep [2024/02/09 11:09] (current) benh
Line 1: Line 1:
 ==== Knowledge Base: ELECTROPLATER ==== ==== Knowledge Base: ELECTROPLATER ====
 {{ :mvimg_20190719_203136.jpg?direct&400|}} {{ :mvimg_20190719_203136.jpg?direct&400|}}
 +
 +** We are no longer guaranteeing quality of the electroplating results. ** The required maintenance for the number of monthly users no longer justifies continued operation, and we'll be phasing the plater out of operation entirely at some point in 2024 (theoretically). You can read below to understand more about the plater.
 +
 +** If you need vias: ** If you can get away with it, we recommend sizing your vias to be 1mm/40mil diameter holes (excluding the annular ring), and then soldering in a standard header pin. Otherwise, your best option is likely to get it fabricated professionally; see [[pcb-design|our PCB Design]] page for some fabrication house options.
 +
 +-----
 +
 === Table of Contents=== === Table of Contents===
   - Overview   - Overview
  • pcb-help_ep.1664836897.txt.gz
  • Last modified: 2022/10/03 18:41
  • by benh